EMI/RFI Honeycombs
EMI/RFI Honeycombs
EMI/RFI Honeycombs
High attanuation performance
Mil-Std applications
Custom sizes with fast time to market design
We use 5052 grade aluminium foil which is a lightweight material offering superior strength and corrosion resistance over commercial grade aluminium foils. It meets all the requirements of MIL-C- 7438. This material is used to manufacture aircraft floors & wing edges, missile wings, helicopter rotor blades etc, so quality and repeatability is assured. Currently we have 7 frame styles available. To keep down production cost, vent panels made with styles 1701, 1703, 1705, 1706 & 1707 are normally supplied with 3 corners notched and the 4th joined corner welded. If required, all 4 corners of the panel can be supplied fully welded. Frame styles 1702 & 1704 are always supplied with fully welded corners.
All frame stylescan be supplied with a conductive gasket to provide the best electrical contact between the frame and mating metal surface.
Standard tolerances for overall Finished Vent Dimensions are +/- 0.8mm
Standard tolerances on Hole Centres are +/- 0.4mm
Typical corner radii on frame styles 1701, 1703, 1705, 1706 & 1707 are R3.0mm
The standard finish for aluminium vent panels is SemPas , it fully meets the RoHS directive and replaces Alocrom 1200. This in-house process applies a permanganate passivation which is a chromate free, inorganic and non toxic coating. The process produces a dense, uniform coating consisting of aluminium and reduced manganese oxides giving a golden yellow colour to the surface. The surface finish is conductive with a low contact resistance equalling Alocrom 1200. It also meets all requirements of MIL-C-5541E for corrosion and electrical conductivity